STANDARD CONFIGURATIONS

Lifting capacity: 100t

Height of lift: Customized

Duty: M3-M8

WHAT PARAMETERS NEED TO BE CONSIDERED?

​

• Lifting capacity of the crane.

• Lifting height required.

• Working class (how many hours the crane will work in one working day).

• The Voltage, frequency.

• The beam model to match (I beam or box type beam).

• Power supply system for the crane?

• Hoist model (wire rope hoist or chain hoist, if chain hoist, manual type or electric type, manual motorized trolley).

• Working environment (temperature, humidity, elevation, indoors/outdoors).

​

Different types of Hoists available are fixed mount (solid mounted), with Monorail Trolley, Single Girder / Double Girder Short Headroom (low head room) and Crab Units.

​

• Hoist with the same features as per fixed execution.

• Maximum capacity is up to 20,000 Kg, rope falls 2 and 4.

• Supporting bars with circular cross sections which support the Hoist in a set-down position.

• Counter-balance on the supporting bar in order to balance the eccentric weight of the Hoist.

• The trolley is composed of an idler wheel assembly and a drive wheel assembly, both have two wheels made of machined pressed steel and mounted on spherical bearings which are permanently lubricated.

• The wheels of the drive wheel assembly are opposing, and have a crown gear wheel This is connected by a transmission bar.

• The steel supporting plates are adjustable along the bar, and have anti derailment device.

• The trolley motor is conical self-braking type, progressive start up and can be supplied:

  • 1 travel speed of 8 m/min or 10 m/min or16 m/min or 20 m/min

  • 2 travel speed of 16/4 m/min or 20/5 m/min

• The reducer is made with gears with helicoidally teeth, which are permanently lubricated in an oil bath.